How Balustrading Support Brackets hold glass

Balustrading Support Brackets fix the glass by means of clips, so the splices always protrude from the glass surface, and the design of the exterior directly affects the effect of the entire building. Therefore, it is required that this connecting piece should be designed as novel and beautiful as possible under the condition of satisfying the force. The sophisticated and novel exterior design will not only not destroy the overall effect of the building, but will enhance its beauty.

 1. The opposite side clamping type means that the connecting pieces are installed in the glue seams of two opposite sides, the connecting claws hold the two adjacent glass edges, and two connecting pieces are used for each side of the upper and lower sides. The characteristics of this method are that the number of accessories used is relatively small and the structure is relatively simple.
 2. The four-side clamping type means that the connecting piece is installed in the glue seam around the glass, and the two adjacent glass edges are clamped, and two connecting pieces are used for each edge. The feature of this method is that the glass plate allowed to be used is larger, and the cost is also higher than that of the previous one because the number of splices used is more than that of the previous one.
 3. The four-corner clamping type means that the connecting piece is installed in the glue seam where the four corners of the glass plate intersect, holding four (or more) glass corners, and there is a connecting piece at each intersection point.