NEW CENTER

Customized Wall Mounted Hinge Profiles Installation Precautions

2022/03/02 14:13
Page view

Today we are going to talk about the installation precautions of customized Wall Mounted Hinge Profiles. It is the installation precautions of customized Wall Mounted Hinge Profiles. The varieties and specifications of hinges are also different, but they remain the same. There are almost no installation precautions for hinges. What is the difference, then let's take the customized Wall Mounted Hinge Profiles installation precautions as an example to learn more about the hinge installation.

customized Wall Mounted Hinge Profiles

Customized Wall Mounted Hinge Profiles Installation Precautions
1. Pay attention to the installation location and quantity. Theoretically, the larger the distance between the two hinges, the stronger the bearing capacity. Of course, this also needs to consider the actual situation. The home door leaf is heavier and can use three hinges, and the general door can use two hinges.

2. Prevent the fan from falling. Falling fan means that the door and window are poorly installed, resulting in a gradual increase in the upper gap and a gradual decrease in the lower gap, resulting in poor switching and even falling off in severe cases. This is usually caused by the selection of customized Wall Mounted Hinge Profiles that are too small, or the lack of matching screws.

3, grasp the gap distance. The gap between the customized Wall Mounted Hinge Profiles and the door panel must be well grasped, otherwise the appearance will be ugly. The gap between the door panel is normally 3-5MM, and expansion joints must be reserved.

4. Make sure the accessories match. Whether the customized Wall Mounted Hinge Profiles groove matches the height, width and thickness of the hinge. Whether the hinge is matched with the screws and fasteners connected to it. The connection method of the customized Wall Mounted Hinge Profiles should match the material of the frame and the fan. For example, the hinge used for the steel frame wooden door, the side connected with the steel frame is welded, and the side connected with the wooden door leaf is fixed by wood screws.

Regarding the installation precautions of customized Wall Mounted Hinge Profiles, we will introduce it here, and hope it will be helpful to you.
 

Previous article: