NEW CENTER

How to choose and install Wall Mounted Hinge Profiles

2022/02/28 14:10
Page view

1. Look at the material
Wall Mounted Hinge Profiles are of poor quality, and the cabinet doors tend to tilt forward and back after being used for a long time, loosening and sagging. High-quality Wall Mounted Hinge Profiles are almost all made of cold-rolled steel, stamped once, and have a solid feel and a smooth surface. Moreover, because the outer coating is thick, it is not easy to rust, strong and durable, and even cracked.

quality Wall Mounted Hinge Profiles

2. View the details
The details can see whether the Wall Mounted Hinge Profiles are good, and then confirm whether the quality is good. The excellent Wall Mounted Hinge Profiles have a solid feel, smooth appearance, and even achieve a quiet effect in design. Defective hardware is usually made of cheap metals such as thin iron sheets, and the doors are stretched and jerky, and even have sharp dynamics.

How to install Wall Mounted Hinge Profiles?

1. First use a device measuring board or a carpenter's pencil to mark the positioning (the drilling margin is usually 5 mm), and then use a pistol drill or a carpenter's hole opener to make a 35 mm hinge cup device hole on the door panel. The drilling depth is usually 5 mm. 12 mm;

2. Put the Wall Mounted Hinge Profiles into the reaming cup hole on the entry board and fix the reaming cup with self-tapping screws;

Wall Mounted Hinge Profiles must be painted or otherwise finished after installation; if the equipment must be removed or tapped, the removal, storage, and restoration operations must be organized; if decorative maintenance is required, it must be handled in accordance with the rules.