NEW CENTER

Precautions for installation of customized Slide Fold Stack

2022/02/15 11:57
Page view

The customized Slide Fold Stack is a hardware composed of two metal or non-metal sheets connected by a pivot pin. These two sheets are also called hinge sheets, which are usually foldable. So how to install the customized Slide Fold Stack? What precautions?

customized Slide Fold Stack

What are the precautions for the installation of customized Slide Fold Stack:

1 Before installing the adjustable customized Slide Fold Stack, check whether the hinge matches the door and window frame and fan.

2. Check whether the customized Slide Fold Stack slot matches the height, width and thickness of the hinge.

3. When installing the customized Slide Fold Stack, make sure that the axes of the hinges on the same sash are on the same vertical line to prevent the doors and windows from warping.

4. It should be checked whether the hinges and the screws and fasteners connected to them are equipped.

5. The connection method of the customized Slide Fold Stack should match the material of the frame and the fan, such as the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed by wood screws .

6. When the two sheets of the customized Slide Fold Stack are not flat, it should be distinguished which sheet should be connected with the fan, which sheet should be connected with the door and window frame, and the side connected with the three sections of the shaft should be The frame is fixed, and the side connected with the two sections of the shaft should be fixed with the frame.