NEW CENTER

How to make customized Slide Fold Stack

2022/02/14 14:21
Page view

The floor springs in the existing heavy-duty free hinges used for glass doors must be dug holes on the ground, while the north mostly uses geothermal heating, which is easy to damage the ground; it cannot support large glass doors, and the bearing capacity is poor and unsightly. Customized Slide Fold Stack In order to solve the above problems, Slide Fold Stack for glass doors is provided.

customized Slide Fold Stack

The customized Slide Fold Stack includes an upper shaft door frame piece, a lower shaft door frame piece, two door leaf pieces and two nuts. The upper shaft door frame piece, the upper door leaf piece and the upper nut constitute the upper shaft hinge; the lower shaft door frame piece and the lower door leaf The part and the nut below form the lower axle hinge.

Compared with the existing Slide Fold Stack, the customized Slide Fold Stack has the following beneficial effects:

1. The lower shaft hinge of the customized Slide Fold Stack does not need to dig a pit during installation, just fix the lower shaft door frame L-shaped fixing plate on the lower shaft door frame to the door frame by screws. The customized Slide Fold Stack replaces the floor spring, so that the ground is not damaged, and the door can be directly linked to the door frame.

2. The customized Slide Fold Stack is a hidden installation, saving space.

3. The customized Slide Fold Stack has a heavy load-bearing capacity and can carry a weight of 300 kg.

4. In appearance, the customized Slide Fold Stack is more beautiful than the existing Slide Fold Stack.