NEW CENTER

What are the precautions for installing China Pool Gate Fittings

2022/01/26 10:05
Page view

Preparation before installation of China Pool Gate Fittings:

1. China Pool Gate Fittings determines whether the height, width and thickness of the hinge match the wooden door. Unmatched hinges in height, width and thickness may cause the hinges to fail to meet the requirements and affect the use of wooden doors;
2. China Pool Gate Fittings need matching screws and other fastening accessories, check whether the accessories are matched and the quantity is complete;
3. Determine the installation quantity and installation height of China Pool Gate Fittings. Select the corresponding hinge connection method according to the material, such as the connection of the wooden door and the frame is fastened with screws.

China Pool Gate Fittings

What are the precautions for the installation of China Pool Gate Fittings:

1. Before installing the adjustable China Pool Gate Fittings, check whether the hinge matches the door and window frame and fan.
2. Check whether the China Pool Gate Fittings slot matches the height, width and thickness of the hinge.
3. When installing China Pool Gate Fittings, make sure that the hinges on the same fan are on the same vertical line to prevent the doors and windows from bouncing.
4. It should be checked whether the screws and fasteners connected to China Pool Gate Fittings are equipped.
5. The connection method of the hinge should match the material of the frame and the fan, such as the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed by wood screws.
6. In the case that the two sheets of China Pool Gate Fittings are not flat, it should be distinguished which sheet should be connected with the fan, which sheet should be connected with the door and window frame, and the side connected with the three sections of the shaft should be The frame is fixed, and the side connected with the two sections of the shaft should be fixed with the frame.