NEW CENTER

How to adjust the deviation of Hydraulic Patch Fitting Series products during use

2021/09/30 11:24
Page view

First of all, be careful not to adjust the entire glass door by yourself, because the glass door is very heavy and hurts it.

Hydraulic Patch Fitting Series products

1. The bathroom glass door is biased and not perpendicular to the ground

This situation is mostly caused by damage to the internal structure of the Hydraulic Patch Fitting Series products or the offset of the wall or glass of the Hydraulic Patch Fitting Series products. You can first tighten all the screws of Hydraulic Patch Fitting Series products. If any looseness is found, correct the position of the bathroom door clamp, and then tighten the screws.
If all screws show no signs of loosening, the internal spring structure of Hydraulic Patch Fitting Series products is damaged and needs to be replaced.

2. The glass door of the bathroom is biased and perpendicular to the ground

This situation is mostly caused by the aging of the gasket between the Hydraulic Patch Fitting Series products and the glass or the position of the bathroom door clip attached to the wall or glass. It is judged that the gasket is aging and the gasket needs to be replaced.